The ESR212 is a full-range 3-way loudspeaker system designed for use with the ESR2800 tri-amplified stereo electronic control pack. The ESR212 loudspeaker system features state of the art transducer design. Comprising of two 12″ woofers, a 6″ midrange driver and a 1″ compression driver, the ESR212 delivers full range high definition audio over large spaces. It has a dispersion of 90 degrees by 40 degrees and can be installed either vertically or horizontally. The ESR212 has multiple M10 fly points as well as custom designed flyware and brackets.
Specifically designed for theatres
| Max SPL Long-term | 128dB |
| Max SPL Peak | 134dB |
| -3dB Response | 38Hz to 22kHz |
| -10dB Response | 33Hz to 28kHz |
| Crossover Point | 500Hz, 2.5kHz |
| Acoustic Design | Horn Loaded |
| Horn Coverage Horizontal / Vertical | 90° x 40° |
| Rotatable Horn | YES |
| High Frequency Amplifier Requirement | 100W from ESR2800 Amplifier |
| Throat Exit Diameter / Diaphragm Size | 1″ / 1.75″ |
| Diaphragm Material | Nitride Titanium |
| Magnet Type | Neodymium |
| Acoustic Design | Horn Loaded |
| Horn Coverage Horizontal / Vertical | 90° x 40° |
| Rotatable Horn | YES |
| Sensitivity | 106dB |
| Midrange Amplifier Requirement | 200W from ESR2800 Amplifier |
| Woofer Size / Voice Coil Diameter | 6″ / 1.75″ |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
| Acoustic Design | Front Loaded, Bass Reflex |
| Sensitivity | 98dB |
| Low Frequency Amplifier Requirement | 1000W from ESR2800 Amplifier |
| Number of Drivers | 2 |
| Woofer Size / Voice Coil Diameter | 12″ / 3″ / Inside Outside |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
| Speaker Input | Amphenol AP-6 Male |
| Speaker Output | – |
| Cabinet Material | Baltic birch |
| Handles | 2 |
| Color | Black / Optional luxury High gloss |
| Height | 1135 mm (44.69″) |
| Width | 447 mm (17.6″) |
| Depth | 444 mm (17.48″) |
| Weight | 45 kg (99.2lbs) |
